减水剂类型对赤泥—矿渣基地聚物注浆材料性能的影响及机理研究

针对赤泥等固体废弃物对环境危害性大且利用率低等问题,以碱激发赤泥-矿渣基地聚物注浆材料为 研究对象,研究了不同掺量的聚羧酸(PA)减水剂、醛酮缩合物(AKC)减水剂和萘系(N)减水剂对材料凝结时间、流动 性及强度等的影响,并通过 XRD、傅里叶红外光谱及 SEM 等设备对减水剂的作用机理进行研究。 结果表明:减水剂增 强了材料的流动性但降低了材料的剪切应力;N 和 PA 减水剂能缩短材料的凝结时间,但 AKC 减水剂会延长材料的凝 结时间;N 和 AKC 减水剂能提高材料的强度,但 PA 减水剂会降低材料的强度;N 减水剂对材料的综合性能提升效果 更加明显,其最优掺量为 0. 7%;减水剂对赤泥-矿渣基地聚物性能提升的作用机理主要是促进地聚合物凝胶的形成。 研究成果为拓展赤泥在工程上的使用途径和效率提供了理论指导。     

Effect of microwave heating time on the gel properties of chicken myofibrillar proteins and their formation mechanism

The present work was conducted to illustrate the mechanism of gel formation of myofibrillar proteins (MPs) under different microwave heating times. The results showed that the denaturation enthalpy (ΔH) of the MPs significantly decreased when the heating time increased from 3 to 9 s and then completely disappeared as the heating time progressed, indicating that the MPs gradually denatured and subsequently aggregated with increasing heating time, which was further verified by the changes in the secondary structure, electrophoretic bands, and gel properties (e.g., water holding capacity and textural profiles) of the MPs. Microstructural images indicated that the MP gel formed under 12 s had the most compact network, indicating that extended microwave heating time could induce quality deterioration of MP gels. Moreover, the hydrophobic forces, electrostatic forces, and disulphide bonds of the MPs gradually intensified with increasing microwave heating time, suggesting that both non-covalent and covalent bonds could promote molecular denaturation and subsequent aggregation of MPs. In addition, correlation analysis revealed that the changes in the molecular conformation of MPs induced by different microwave heating times could effectively regulate the formation of MP gels and their related properties.     

基于现代审美下的赣傩艺术元素分析与设计应用

目的 赣傩艺术元素内容丰富并保存完整,是研究我国古代赣傩地区文化与艺术的珍贵史料.研究赣傩艺术元素的提取及衍生图案的设计方法,在设计应用中表达赣傩傩面具、选取傩舞形和构筑傩庙魂,能给当代赣傩艺术元素的产品设计以指引.方法 通过直接引用、形意结合和局部强化的设计方法,增厚其丰富内涵、设计个性和主题意蕴.通过现代化审美中"绿色化、感性化、地域化"的要求,遵循"以退为进,化繁为简""多元并存,个性体现"的原则,强化赣傩艺术元素的独特风格.结论 用现代的手法,将特色的赣傩艺术元素植入到理性的产品设计中去,使赣傩艺术元素与现代设计思想有机结合.在继承传统文化与现代流行中找到契合点,深入挖掘赣傩艺术元素蕴含的文化精神、文化胸怀和文化自信,使中华传统文化在现代审美下进行创新再现.     

高排放标准下道路燃油车处境分析

针对国六排放标准实施后道路燃油车竞争和生存压力加大的问题,调查统计近5 a汽车及新能源汽车的保有量,汽车保有量以年均12%的比例增长,新能源汽车保有量以每年约50%的比例增长;研究和对比近年来机动车排放标准,分析道路燃油车节能减排存在的问题,从政策引导制约、供油企业升级改造、燃油车本身的改进优化等几方面提出时效性方案与建议。     

管状带式输送机在线纠扭托辊的研究与应用

管状带式输送机是一种新型环保的散状物料连续输送设备,在运行过程中受各种因素影响,头、尾过渡段经常会跑偏,管状段经常会扭转,常规停机调偏纠扭方法已不能胜任复杂路线长距离管带机稳定运行的要求。为适应市场发展趋势,设计人员分析了管带机扭转原因,结合纠扭基本原理及常规纠扭方法,新开发出一种在线(不停机)纠扭托辊并投入项目应用。     

Practices,projects and portfolios: Current research trends and new directions

Project portfolio management (PPM) bridges strategy and project management. Traditional research in PPM has primarily investigated the rational, top-down and structural aspects of strategizing. By doing so, it has failed to focus on the underlying practices that are triggered by the strategy and how these practices frame strategy implementation. Practice-based research provides a methodological lens to explore the reality of strategic enactment through the project portfolio. Practice-based perspectives are under-represented in PPM research; therefore the aim of this paper is to provide an agenda for further practice-based research in PPM. Central to this agenda is a concern with various aspects of practice, including its discursivity, representation, dynamic capabilities, leadership and materiality.     

机械结构分层优化技术研究进展

复杂机械结构优化设计一般表现为多目标、多约束、多参数的优化问题,所以复杂结构优化设计过程通常存在计算复杂、不易收敛等困难。分层优化技术是复杂结构优化设计的一种有效途径,通过将优化问题中复杂的约束、设计变量以及功能目标合理分解为若干子层问题进行求解,然后通过协调得到复杂机械结构整体优化问题的结果。文章对机械结构分层优化技术的理论、应用研究现状进行了总结并探讨了其关键技术环节及发展趋势。     

旋转式采煤工艺在煤矿生产中的应用

采煤工艺作为煤矿正常生产的核心,直接关系到综采作业的效率、煤炭回采率和综采作业的安全性,随着对综采作业要求的不断提高,旋转式采煤工艺在煤矿井下的应用范围也不断扩大。以黄家沟煤业1205综采作业面为分析对象,对旋转式采煤工艺在井下的应用情况进行了研究,为优化综采方法、提升综采作业效率和煤炭回采率奠定基础。